Installing The Battery And Storage Card - HTC Touch Pro2 Verizon Quick Start Manual

8 Quick Start Guide

4. Installing the Battery and Storage Card

You need to remove the back cover before you can install the battery or storage card. Also,
make sure to always turn off the power before installing or replacing the battery.
Note Your Global Phone accommodates a GSM SIM card for global coverage on GSM networks
outside of the United States. Refer to the User Manual PDF on the Getting Started Disc for
instructions on inserting a SIM card. SIM cards must be purchased from a carrier in the
country you wish to use the phone and are not sold or supported by U.S. Cellular.
To remove the back cover
1.
Make sure your phone is turned off.
2. Remove the stylus.
Note
3.
Firmly hold the phone with both hands and the
front panel facing down.
4.
Push the back cover up with your thumbs until
it disengages from the phone and then slide it
up to remove.
You need to temporarily remove the stylus to
be able to remove or replace the back cover.