How Do You Want To Use The Router - Efficient Networks SpeedStream 5600 Series Installation Manual

How do you want to use the Router?

The router is configured with several default configuration settings and
these settings will be appropriate for most installations (see page 25 for
default configuration settings). However, to assess whether these settings
will work for you, you need to decide how you are planning to use the
router. The flowchart below allows you to choose a simple configuration
procedure to use to configure your router. More complex configurations
can be configured using the Advanced Setup feature of the HTML
interface.
NOTE: Your service provider should have notified you which
encapsulation method to use, PPP or RFC 1483. Refer to
"Encapsulation Methods: PPP and RFC 1483" on page 30 for
descriptions of PPP and RFC 1483.
start
Do you
need a router or
a bridge?
router
Do you want
to use PPP?
NO
Do you want
to use
RFC 1483?
Efficient Networks, Inc.
Configuring the
Refer to procedure
bridge
27
on page
YES
Refer to procedure
on page
26
YES
Refer to procedure
on page 26
How do you want to use the Router?
Router
finish
23