Table of Contents
Advertisement
2
When the MSDOS window appears, enter
telnet speedstream
3
This will bring up a
prompt for the router's command line interface.
Refer to "Command Line Interface" on page 20 for details on the user
4
interface.
FTP Access for Firmware/Configuration Uploads
The router provides an FTP server and can accept FTP client commands
from an external host. Using FTP, you can
Upload a new revision of the router firmware
•
Save the router's current configuration to a file on the host computer
•
and then upload the configuration to another 5600 series router.
NOTE: A configuration file saved from a Bridge 1.1.x router can not be
loaded on a router running the Router/Bridge 2.0 firmware. However, a
configuration file saved from a router running Router/Bridge 1.0 can
be uploaded to a router running version 2.0 firmware.
To log into the router via FTP:
If using Windows on a PC, select
1
. If on a UNIX system, bring up a shell window.
Prompt
When the MSDOS window appears, enter:
2
3
At the
prompt, enter the username "
User
At the FTP command prompt, type in:
4
Refer to "Command Line Interface" on page 20 for details on the user
5
interface.
Efficient Networks, Inc.
telnet 10.0.0.1
.
Telnet
window which will display the command
>
Start
Programs
ftp 10.0.0.1
Anonymous
binary
or
>
Command
"
Accessing the Router
17
Advertisement
Table of Contents
