Installation Instructions
NOTE: The labels for the back panel of the router are located on the
underside of the unit.
1
Be sure the Power switch is in the OFF position.
Connect the power cable to the power connector on the back of the
2
router; then connect it to a power outlet.
DSL
Connection
to phone line
Power
(Out=OFF, In=ON)
To connect the router directly to the Ethernet port on a PC,
3
workstation or laptop, use the gray RJ45 cable, which is a
straight-through UTP copper wire cable. The cable labeled "
on one end is a crossover UTP copper-wire cable that must be used
only when connecting the router to an Ethernet hub.
4
Connect one end of an RJ11 telephone cable to the router's
and the other end to the DSL service port (wall jack).
RJ11(phone)
Cable
Plug cable
into DSL
wall jack
Depress the router's power button to turn on the unit.
5
12
Installation Instructions
Ethernet
Power
Serial
Connection
Connection
Port
to computer
(optional)
Power
GRAY RJ45
Ethernet Cable
Router
XOVER
"
DSL
port
Computer
Efficient Networks, Inc.