Wireless Station Configuration; Wireless Configuration On Windows Xp - TRENDnet TEW-635BRM - Wireless Router User Manual

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the Wireless ADSL Modem Rou-
ter's Access Point, regardless of the operating system which is used on the client.
To use the Wireless Access Point in the Wireless ADSL Modem Router, each Wireless Station
must have compatible settings, as follows:
Mode
SSID (ESSID)
Wireless
Security

Wireless Configuration on Windows XP

If using Windows XP to configure the Wireless interface on your PC, the configuration proce-
dure is as follows:
1. Open the Network Connections folder. (Start - Settings - Network Connections).
2. Right-click the Wireless Network Connection, check that it is enabled (menu option says
Disable, rather than Enable) and then select View Available Wireless Networks.
3. You will then see a list of wireless networks.
The mode must be set to Infrastructure (rather than Ad-hoc)
Access points only operate in Infrastructure mode.
This must match the value used on the Wireless ADSL Modem Router.
Note! The SSID is case sensitive.
By default, Wireless security on the Wireless ADSL Modem Router is
disabled.
•
If Wireless security remains disabled on the Wireless ADSL Modem
Router, all stations must have wireless security disabled.
•
If Wireless security is enabled on the Wireless Router (either WEP
or WPA-PSK), each station must use the same settings as the Wire-
less ADLS Router.
58