TRENDnet TEW-635BRM - Wireless Router User Manual page 105

Status Function
ADSL
Modem Status
DownStream
Connection Speed
UpStream
Connection Speed
ADSL Details
LAN
IP Address
Network Mask
MAC Address
Wireless
SSID 1/ SSID 2
Region
Channel
Wireless AP
Broadcast Name
System
Device Name
Firmware Version
Buttons
ADSL Details
Attached Devices
Refresh Screen
•
Binding - this function is same as Router mode.
This indicates the status of the ADSL modem component.
Displays the speed for the DownStream Connection.
If connected, displays the speed for the Up Stream (upload)
ADSL Connection.
Click this button to open a sub-window and view the details of
each VC (Virtual Circuit).
The IP Address of the Wireless ADSL Modem Router.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the MAC Address for the Wireless ADSL Modem
Router, as seen on the LAN interface.
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set Identifi-
er).
The current region, as set on the Wireless screen.
This shows the Channel currently used, as set on the Wireless
screen.
This indicates whether or not the Wireless Access Point feature is
enabled.
This indicates whether or not the SSID is Broadcast. This setting
is on the Wireless screen.
The current name of the Router. This name is also the "hostname"
for users with an "@Home" type connection.
The version of the current firmware installed.
View the details of each VC (Virtual Circuit).
This will open a sub-window, showing all LAN and Wireless
devices currently on the network.
Update the data displayed on screen.
102