TRENDnet TEW-635BRM - Wireless Router User Manual page 25

Setup Wizard VC Screen
VC
Enable
VPI
VCI
Multiplexing
ATM Service
LAN IP Address
The VC number is displayed
To use this VC, you must enable it by checking this checkbox.
Enter the VPI value provided by your ISP.
Enter the VPI value provided by your ISP.
Select the multiplexing value provided by your ISP.
Select the multiplexing value provided by your ISP.
Enter the IP address of the device on your LAN which will receive the
data on this VC.
•
For Video-on-Demand, this would be the IP address of your
SetTop Box.
•
For VoIP, this would be the IP address of your VoIP TA.
•
Note that this IP address does not have to be in the same IP ad-
dress range as other devices on your local LAN.
22