Side Clip Gpims; Different Physical Style Of Gpims - Enterasys Matrix E6 5G102-06-G Install Manual

Gigabit ethernet modules
Hide thumbs Also See for Matrix E6 5G102-06-G:
Table of Contents

Advertisement

CAUTION: The GPIM and the module are sensitive to static discharges. Use an
antistatic wrist strap and observe all static precautions during this procedure. Failure to
do so could result in damage to the GPIM or module. Always leave the GPIM in the
antistatic bag in which it was shipped or an equivalent antistatic container until ready to
install it.
Figure 3-1 Different Physical Style of GPIMs
After installing a GPIM, refer to
3.2.1

Side Clip GPIMs

This section applies only to side clip GPIMs. Damage can result to the GPIM and module if the
directions in this section are not followed carefully.
Refer to
Appendix C
CAUTION: The GPIM and the module are sensitive to static discharges. Use an
antistatic wrist strap and observe all static precautions during this procedure. Failure to
do so could result in damage to the GPIM or module. Always leave the GPIM in the
antistatic bag in which it was shipped or an equivalent antistatic container until ready to
install it.
Section 3.6.1
for cable specifications for the GPIMs.
Installing Options into the 5G106-06
for details on connecting the GPIM to the network.
Installation
3-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Matrix e7 5g106-065g102-065g106-06

Table of Contents