Dynamic - TRENDnet TEW-432BRP - Wireless Router User Manual

Add: Click to add the configuration to the static IP address table at the bottom of
the page.
Update: Select one of the entries in the static IP address table at the bottom of the
page and, after changing parameters, click "Update" to confirm the changes.
Delete: Select one of the entries in the static IP address table at the bottom of the
page and click "Delete" to remove the entry.
New: Click "New" to clear the text boxes and add required information to create a
new entry.

2.4.2 Dynamic

This screen enables user to set NAT parameters.
NAT: Click the radio buttons to enable or disable NAT.
Transmit: Click the radio buttons to set the desired transmit parameters, disabled,
RIP 1, or RIP 2.
Receive: Click the radio buttons to set the desired transmit parameters, disabled,
RIP 1, or RIP 2.
36