Connection Details - Dynamic Ip Address - TRENDnet TEW-435BRM User Manual

54mbps 802.11g adsl modem router
Hide thumbs Also See for TEW-435BRM:
Table of Contents

Advertisement

Operation and Status
used to establish a connection.
If the connection currently exists, the Disconnect button can
be used to break the connection.
Normally, it is not necessary to use the Connect and
Disconnect buttons unless the setting "Connect
automatically, as required" is disabled.
Negotiation
This will show the Negotiation status of the connection.
Authentication
This will show the Authentication status of the connection.
IP Address
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
Network Mask
The Network Mask associated with the IP Address above.
Buttons
Connect
If not connected, establish a connection to your ISP.
Disconnect
If connected to your ISP, hang up the connection.
Close this window.
Close

Connection Details - Dynamic IP Address

If your access method is "Direct" (no login), with a Dynamic IP address, a screen like the
following example will be displayed when the "Connection Details" button is clicked.
Figure 43: Connection Details - Fixed/Dynamic IP Address
Data - Dynamic IP address
Dynamic IP address
IP Address
The current IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
Wireless ADSL Router User Guide
Subnet Mask
Default Gateway
DNS Server
DHCP Server
Lease Obtained
Lease Expires
Buttons
Release
Renew
Close
47
The Subnet Mask associated with the IP Address above.
The IP address of the remote Gateway or Router associated with the
IP Address above.
The IP address of the Domain Name Server which is currently used.
The IP address of your ISP's DHCP Server.
This indicates when the current IP address was obtained, and how
long before this IP address allocation (the DCHP lease) expires.
If an IP Address has been allocated to the TEW-435BRM (by the
ISP's DHCP Server, clicking the "Release" button will break the
connection and release the IP Address.
If the ISP's DHCP Server has NOT allocated an IP Address for the
TEW-435BRM, clicking the "Renew" button will attempt to re-
establish the connection and obtain an IP Address from the ISP's
DHCP Server.
Close this window.
48

Advertisement

Table of Contents
loading

Table of Contents