Page 1
TEW-435BRM F.A.Q. Q: How do I configure the TEW-435/504BRM (b1) to a DSL, PPPoE connection? Step 1 Open your web browser and type the IP address of the TEW-435/504BRM in the address bar. The default IP address is 192.168.0.1. At the login, enter the default username (admin) and password (password).
Page 2
TEW-435BRM F.A.Q. Note: In the event that the Auto-Detect method does not make the connection, you can manually setup the modem. Make sure that you have all the information from your ISP, your VCI, VPI, Username and Password. If you have a static IP: you will need the IP address, Subnet Mask,...
Page 3
TEW-435BRM F.A.Q. Q: How do I change the username & password on my TEW-435/504BRM? Open your web browser and type the IP address of the TEW-435/504BRM in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (password).
Page 4
TEW-435BRM F.A.Q. Q: How do I change the IP Address of my TEW-435/504BRM? Open your web browser and type the IP address of the TEW-435/504BRM in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (password).
Page 5
TEW-435BRM F.A.Q. Step 3. Highlight the Internet Protocol (TCP/IP) by single clicking on it then click on Properties. Step 4. Select Obtain an IP address automatically and Obtain DNS server address automatically then click OK.
Page 6
TEW-435BRM F.A.Q. Step 5. Click OK again. Step 6. Your computer is now ready to access and configure the TEW-435/504BRM. Step 7. Open your web browser and type the IP address of the TEW-435/504BRM in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (password).
Page 7
Q: How do I open ports on the tew-435brp/504? Step 1. Open your web browser and type the IP address of the TEW-435BRM / 504 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (password).
Page 8
TEW-435BRM F.A.Q. Step 3. Under “Add New Service” Define a name for the service. Service names must be unique. Define the Protocol. TCP, UDP or Both. Define the Start port. Define the Finish port. If it’s only a single port enter in the same as the Start port.
Page 10
Q: How do I change the SSID and Channel on my router? Step 1. Open your web browser and type the IP address of the TEW-435BRM in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (password).
Page 11
TEW-435BRM F.A.Q. Examples: Authentication type: WEP WEP Type: Open System Mode: Hex WEP Key: 64-bit Key 1: 0000000000 64bit HEX = 10 digit HEX key. (Can only use letters A~F and numbers) 128bit HEX = 26 digit HEX key. (Can only use letters A~F and numbers) You can also choose WPA-PSK.