Using The Configuration Menu - D-Link DWL-3260AP - AirPremier - Wireless Access Point User Manual

Using the Configuration Menu

To configure the DWL-3260AP, use a computer which is connected to the DWL-3260AP with an
Ethernet cable (see the Network Layout diagram).
First, disable the Access the Internet using a proxy server function. To disable this function,
go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the
enable box.
Start your web browser program (Internet Explorer, Netscape Navigator
Type the IP address and http port of the DWL-3260AP in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-3260AP and your computer are in the same subnet.
After the connection is established, you will see the user identification window as shown.
Note: If you have changed the default IP address assigned to the DWL-3260AP, make sure to
enter the correct IP address.



Note: If you have changed the password, make sure to enter the correct password.
Type admin in the User Name field
Leave the Password field blank
Click OK
Using the Configuration Menu
) .
™
13