D-Link DWL-3260AP - AirPremier - Wireless Access Point User Manual page 28

Wireless managed ap

Hide thumbs Also See for DWL-3260AP - AirPremier - Wireless Access Point:

Home > Advanced Settings > Multi-SSID

If you want to configure the Guest and Internal networks on Virtual LAN (VLANs), the switch and

DHCP server you are using must support VLANs. As a prerequisite step, configure a port on the

switch for handling VLAN tagged packets as described in the IEEE802.1Q standard.

Enable Multi-SSID:

Enable VLAN Status:

Check to use Multi-SSID.

Check to use a VLAN.

IEEE802.11g is selected.

Band:

Index:

You can select up to 7 multi-SSIDs. The default multi-SSIDs is the

primary, which puts the total to 8 multi-SSIDs.

SSID:

Service Set Identifier (SSID) is the name designated for a specific

wireless local area network (WLAN). The SSID's factory default

setting is default. The SSID can be easily changed to connect to an

existing wireless network or to establish a new wireless network.

Using the Configuration Menu

Table of Contents

Show Quick Links