Basic Troubleshooting Tips - NETGEAR WG311v2 - 54 Mbps Wireless PCI Adapter Installation Manual

Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2

Basic Troubleshooting Tips

If you have problems connecting to your wireless network, try the tips below.
Symptom
I can connect to
an access point,
but I cannot
connect to other
computers on
the network or
the Internet.
Also, for problems with accessing network resources, the Windows software might not be installed
and configured properly on your computers. Please refer to
Network Access" of the Reference Manual on the NETGEAR 54 Mbps Wireless PCI Adapter
WG311 v2 Resource CD.
Basic Setup
Cause
This could be a
physical layer
problem or a
network
configuration
problem.
Check to make sure that the access point is physically
connected to the Ethernet network.
Make sure that the IP addresses and the Windows
networking parameters are all configured correctly.
Restart the cable or DSL modem, router, access point,
and notebook PC.
Appendix C, "Preparing Your PCs for
Solution
2-13