NETGEAR WG311v2 - 54 Mbps Wireless PCI Adapter Installation Manual page 22

Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2
Configure your WG311 v2.
Right-click on the network icon in the
a.
Windows XP system tray to open the
network options menu.
Click on the View Available Wireless
b.
Networks menu item.
If there is more than one wireless
c.
network in your vicinity, select the one
to which you will connect.
Click on the "Allow me to connect to the
d.
selected wireless network even though
this is not secure" check box.
Click Connect.
e.
2-6
Right-click here to display this menu.
Windows XP Network Connection Alert
Note: This procedure assumes your wireless network
is not using WEP security. If your wireless network
uses WEP, set up your WG311 v2 accordingly. To view
WEP settings help, click the Advanced button and
click the "Learn about..." link on the Windows XP Local
Area Connection Wireless Networks Properties tab
page.
Basic Setup