NETGEAR WG311v2 - 54 Mbps Wireless PCI Adapter Installation Manual page 26

Installation Guide for the NETGEAR 54 Mbps Wireless PCI Adapter WG311 v2
Configure your WG311 v2 and save the
Profile.
Open the WG311 v2 Smart Wireless
a.
Settings Utility by clicking on the icon in
the Windows system tray. The utility
opens to the Settings page.
Change the Network Name SSID to
b.
match your network.
Tip: As an alternative to typing in the
SSID, you can use the Network tab to
view the available wireless networks.
Double-click on the desired network.
Click the Apply button to activate the
c.
connection.
Enter a name for your profile and click
d.
the Save Profile button to store the
current settings.
Tip: If you use your notebook PC to
connect to a wireless network at work
and at home, create profiles called work
and home.
Note: This procedure assumes you are
connecting to a wireless network which is not
using WEP security. If your network includes
WEP settings, enter the security information
in the Security section. For help with these
steps, see "Enabling Wireless Security
Features" on page
2-10
3-8.
Click here to open the configuration utility.
WG311 v2 system tray icon
WG311 v2 Configuration Utility
Note: The NETGEAR default settings are
Infrastructure mode, with ANY for the wireless
network name SSID, and WEP disabled.
Basic Setup