D-Link Smart WLAN Manager User Manual
APPENDIX
Cold Start the AP:
Please follow the instructions below to cold start your AP from the DES-1228P switch Web UI:
1. Connect to the Switch configuration Web page, and select PoE port Settings.
2. Select the AP connected port at the switch, from port and to port, and disable the PoE_Enable
3. Press the "Apply" button and wait for a few seconds
4. Select the "From Port" and "To Port". Enable the PoE_Enable and wait about 1 minute.
5. Activate the WLAN Smart Manager and press start polling from the toolbar.
45
D-Link Corporation