Connecting Through The Com Port - 3Com 3CRWE915075 - AirConnect 9150 11n 2.4 GHz PoE Access Point User Manual

Connecting Through the Com Port

Instead of using an IP address to configure the Access Point a
Null modem cable, connected to the RJ-45 Console Port, can be
used.
In your terminal settings ensure that the following configuration
is met:
■
■
■
■
■
Once connected enter the user name and password. The default
values are as follows:
■
■
Once logged in, type"?" for a list of commands.
Bits per Second – 15200
Data Bits – 8
Parity – None
Stop bits – 1
Flow Control - none
Username: admin
Password: password
Connecting Through the Com Port 61