3Com 3CRWE915075 - AirConnect 9150 11n 2.4 GHz PoE Access Point User Manual page 28

24 System Configuration
Figure 8 2.4G Radio Wireless Network
2 Click Next to continue the configuration or click Cancel to start
again.
3 Figure 9 allows you to set up the following information:
■
■
■
■
IP Network Setting – Check to either obtain an IP address
via DHCP or specify an IP Address manually.
IP Address – Enter the IP address that you want to assign.
IP Subnet Mask – Enter your networks subnet address.
Default Gateway – If used, enter the gateway address that
the device should go through.