JVC GZ-HM200AUS - Everio Camcorder - 1080p Manual Book page 63

Mode Menus
AUTO SWITCH REC MEDIA
Switches recording media
!
automatically from SLOT A to
SLOT B and vice versa after the
card in the selected slot is full.
Menus
l ON-SCREEN DISPLAY
Displays indication modes on LCD
monitor.
DISPLAY SETTINGS
9 LANGUAGE
Sets the display language.
: CLOCK ADJUST
Sets the time.
; DATE DISPLAY STYLE
Sets the date and time display
format.
B
MONITOR BRIGHT
Sets the brightness of the LCD
monitor.
C
MONITOR BACKLIGHT
Enables you to adjust the brightness
of backlight on the monitor.
FOCUS ASSIST CAMERA
When this function is used, the
outline of the focused object is
displayed in the selected color.
Settings: [ ] = Factory-preset
OFF: Deactivates the function.
[ON]: Activates the function.
NOTE
The switching time of the SD cards requires
approximately 3 seconds. If there are many videos and
data in the SD card, it might take up to a few minutes
to perform the switch. No video is recorded during that
time.
Settings: [ ] = Factory-preset
Select [ON-SCREEN DISPLAY] on Video Playback or
Image Playback Mode.
OFF / [DISPLAY ALL] / DISPLAY DATE ONLY /
DISPLAY DATE 5 SEC
Select [DISPLAY SETTINGS], then select sub-menus.
[ENGLISH]
See page 20
See page 19.
DATE STYLE:
[month.day.year] / year.month.day / day.month.year
TIME:
24h / [12h]
Adjusts the brightness of the display by using the touch
sensor.
BRIGHTER: Brightens the backlight on the monitor
regardless of the surrounding conditions.
STANDARD: Select this when saving the battery life.
[AUTO]: The brightness will automatically be set
to [BRIGHTER] when using outdoors and to
[STANDARD] when using indoors (when using the
battery pack).
RED / GREEN / [BLUE]