Fader Select; Name; Save To Accomp - Yamaha Portatone PSR-5700 Advanced Features

The Custom Accompaniment Programmer
3

FADER SELECT

£FADER SELECT
C1` C2` C3` C4" C5" C6" —
– +
Purpose:
Assigns the CHORD 1 and CHORD 2 volume controls to
Custom Accompaniment Programmer CHORD tracks 1
through 6, determining which control affects which chord
tracks when the accompaniment is played back.
4

NAME

¢NAME
_
Big Band
– +
Purpose:
Allows a name of up to 8 characters to be assigned to the
current custom accompaniment before it is stored via the
following "5. SAVE TO ACCOMP." function.
5

SAVE TO ACCOMP.

SAVE TO ACCOMP.
Set to=Cus0
– +
Purpose:
This function stores the current custom accompaniment to
a specified custom accompaniment number.
2 0
– +
– +
-Execute-
– +
Procedure:
Use the [<] and [>] buttons to position the cursor at the
chord track you want to assign (C1 through C6), then use the
left or right [-] and [+] buttons to assign either "1" (the
CHORD 1 volume control) or "2" (the CHORD 2 volume
control) to the selected chord track.
Notes:
It is a good idea to group the chord tracks according to
their musical function. For example, tracks containing basic
block chords could be assigned to the CHORD 1 control
while tracks containing more "decorative" chord work could
be assigned to the CHORD 2 control.
Procedure:
Use the [<] and [>] buttons to move the underline cursor
to the various character positions, then use the left [-] and [+]
buttons to select the required character for each position.
Notes:
Independent names can not be assigned to INTRO, FILL,
and ENDING patterns. Here's a list of the characters that can
be selected via the left [-] and [+] buttons.
Character list
[Space]
!"#$%&'()*+,-./0123456789:;<=>?@
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}
Procedure:
The "Set to" parameter in the first display screen deter-
mines to which custom accompaniment number the accom-
paniment will be stored — Cus0, Cus1, Cus2, Cus3, Cus4, or
Cus5. When the "Set to" parameter has been set as required
by using the left [-] and [+] buttons, press the right [-] and
[+] buttons under "-Execute-" on the display to actually store
the current custom accompaniment in the specified custom
accompaniment number. "Completed" will appear when the
operation is complete.