Scart Connector Wiring; Cleaning The Video Heads - Samsung UW-17J11VD Owner's Instructions Manual

C18A_ENG_europe_17"_film

SCART Connector Wiring

If you wish to connect other equipment via the SCART connectors on your television, contact your
dealer or a qualified technician to wire the A/V cable as illustrated below.
Pin
1 Audio output R
2 Audio input R
3 Audio output L
4 Audio chassis return
5 Video chassis return (RGB blue)
6 Audio input L
7 RGB blue input
8 Switching voltage
9 Video chassis return (RGB green)
10
11 RGB green input
Pins 5, 7, 9, 11, 13, 15 and 16 are used for RGB processing.

Cleaning the Video Heads

If you find that the quality of the pictures is poor, you can use a
special cleaning cassette (purchased from your local video dealer).
Insert the cleaning cassette and press the PLAY/PAUSE (
After about 10 to 15 seconds, press the STOP ( ), followed by
OPEN/CLOSE ( ) button to eject the cassette. Repeat the operation if
necessary.
If the quality of the picture is not improved after having
cleaned the video heads, refer to "Troubleshooting" on
page 80.
10/10/03 4:11 PM Page 77
Signal
-
Pin Signal
12
-
13 Video chassis return (RGB red)
14 -
15 RGB red input
16 Blanking signal (RGB switching)
17 Video chassis return
18 Blanking signal ground
19 Video output
20 Video input
21 Screening/chassis return
) button.
ENG
77