Table of Contents
Advertisement
C18A_ENG_europe_17"_film
Recording a Programme Directly
Before recording a programme, you must have stored the
corresponding channel. If you have not done so, refer to pages
16~18 for more details.
1
Select the channel number to be recorded using the P
button or the AV source using the INPUT button for a satellite
tuner or external video source
Result:
The channel number is displayed and the programme
can be seen on the television.
2
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
3
Hold down the REC (
recording.
Result:
The record indicator appears on the screen.
During recording you can also press the INFO button
to display the number of the programme being
recorded and the remaining time on the cassette.
4
To...
Stop recording temporarily
(to avoid recording TV spots or
change channels for example)
Start recording again
Stop recording completely
If the VCR is left in Pause mode for more than ten minutes,
recording will be stopped automatically to protect the heads
and the cassette.
If the cassette is ejected when you start recording,
check that the safety tab is intact or the opening is
covered with adhesive tape.
If you reach the end of the tape while recording, the
cassette rewinds automatically.
10/10/03
4:11 PM
Page 45
) button for at least two seconds to start
Then press the...
PLAY/PAUSE (
REC (
).
STOP ( ).
or
).
ENG
45
Hide quick links:
Advertisement
Table of Contents
