Cropping Data Files - Edelbrock QwikData 91001 Manual

Cropping Data Files

Sometimes you may log more data than you really wanted. In these cases you can use the crop function to eliminate the unwanted
data. To crop a data file, open the file for viewing in the Historical Graph display. Set the two cursors around the part of the data file
that you want to keep and then select "Crop Datafile" from the "Graph" menu.
After setting the two cursors as desired, you can also click the right mouse button and select "Crop Data" from the pop up menu.
Selecting the Crop function will display the "Save Data File" screen.
Enter a file name to use to save the cropped data file and click the "Save" button to write the cropped file to your disk. The "Crop"
function does not alter the original data file but creates a new file containing only the data of interest.
NOTE: The "Crop" function is not active if the data file contains multiple laps.
Catalog #91001, 91003, 91004, 91005, 91007, 91009
Rev. 9/06 - RS/mc Page 38 of 47
©2006 Edelbrock Corporation
Brochure #63-0282