Channel Colors; Advanced Options - Edelbrock QwikData 91001 Manual

Min Scale/Max Scale
As an alternative to autoscaling, you can select the minimum/maximum values that you want to display on the screen. For instance,
while the tach signal is calibrated from 0 to 9000 RPM, you may want to concentrate on the 3000 to 6000 range. In this case, enter
3000 as the Min. Scale value and 6000 as the Max. Scale value.

Channel Colors

To change the graph color of a channel, double click on the corresponding color box to bring up the color selection window.
Choose one of the pre-defined colors from the Basic Colors palette, or create a custom color from the palette. Click on "OK" to exit
the window and select the chosen color.

Advanced Options

If Advanced Options is selected from the "Tools" menu, two more options appear for each channel; "Average"
and "Lookup". Normally you would not need to change any of these settings.
Average determines whether the data averaging selected in the "Logging" setup is utilized in Realtime display
mode. If "Average" is not selected, each value displayed in the Realtime Graph is the last "Raw" analog value.
Depending on the log rate and what the actual signal looks like, averaged and raw data may look quite
different.
"Lookup" determines whether or not the real time values displayed utilize the data calibration tables or are
passed as raw values (0-10 Volts) to the realtime display.
Catalog #91001, 91003, 91004, 91005, 91007, 91009
Rev. 9/06 - RS/mc Page 24 of 47
©2006 Edelbrock Corporation
Brochure #63-0282