Manually Installing the USB Driver
If the USB driver has been installed successfully, skip to "Using yepp station".
Refer to the following procedure only if the USB driver is not installed automatically.
When an error occurs during installation of the USB driver
1
Check the device manager.
Windows 98,ME:
Control Panel
System
Device Manager
Windows 2000 Professional:
Control Panel
System
Hardware
Device Manager
Windows XP Professional:
Control Panel
System
Hardware
Device Manager
2
Check if there is a device listed with
an exclamation point or a question
mark (displayed as unknown device
or USB device).
3
Double click on the device listed with an exclamation point or a question mark.
Note
If you are using Windows 2000 and your version of Windows does not recognize the USB driver, please
download and install the latest service pack from windowsupdate.microsoft.com
The installation method may vary depending on the type of PC or operating system.
Contact your PC dealer or service center for installation information.
If errors occur continuously when you install the USB driver, reconnect the USB cable after rebooting
your system.
18
4
After selecting the driver, click on [Update Driver].
5
Select a compatible driver, click on [Next] to finish.
Continued...
19