Connecting The Player To Your Pc With The Usb Cable; Installing The Usb Driver - Samsung YP-T7F Service Manual

3. PC Connection
Connecting the player to your PC
For Windows 98SE, install the USB driver prior to connecting the player to PC.
System Requirements.
The PC system must meet the following specifications:
Pentium 200MHz or greater
Windows 98 SE/ME/2000/XP
100MB of available hard disk space
I

Installing the USB Driver

For Windows 98SE, install the USB driver before connecting the player and the PC.
For Windows ME, 2000 or XP, USB driver installation is not required. See
"Connecting the player to your PC (Page 14)".
1
Select your country.
2
Insert the Installation CD into CD-ROM drive.
Select [Install Win98 USB Driver].
3
Follow the instructions in the window to complete the installation.
When software installation is completed, connect the player to PC as shown
in the next page.
ªÔº∫ ¿¸¿⁄
CD-ROM drive(double speed or greater)
USB port (2.0) supported
DirectX 9.0 or above
I

Connecting the player to your PC with the USB cable

1
Connect the USB cable to the USB port on your computer.
2
Connect the other end of the USB cable to the USB cable connection
port on the bottom of the player.
If you disconnect the USB cable from your PC while implementing a command
or initializing during USB driver installation, your PC may not function correctly.
3
The USB driver is installed with a message saying that it is searching for
a new device. You may not see the display screen during installation.
Go to the device manager to check that installation has been successfully
completed.
4
Upon installation of the USB driver "Samsung YP-T7F USB Device"
will appear in the [Device Manager].
PC
USB Cable
Player
3-7