Loading A Dvd Disc; Using The Remote Control Unit - Samsung DVD-L100W Manual

E N G L I S H

Loading a DVD Disc

1. After plugging in the player, the first time you press the POWER button, this screen comes up:
Press the UP/DOWN buttons to select the language, and then press the ENTER button.
(This screen will only appear the very first time you plug in the player. )
2. Press the OPEN button to open the disc lid.
• The disc lid opens up to around a 60-degree angle.
Do not attempt to open the lid to an angle beyond this range. The lid may become damaged.
3. Place a disc gently into the tray.
• You should hear and feel the disc snap firmly into place.
Caution
• Place a disc into the tray with the disc's label facing up.
4. Close the disc lid and then press the part marked "PUSH" until it clicks shut.
Important!
• Make sure that the disc is correctly placed. Otherwise, the disc and/or the DVD player
may be damaged.
• If the disc is placed upside down in the disc tray or the region number of the DVD is not
supported, NO DISC will appear on the screen.
• You don't take out a disc until the disc entirely stoped.
• Press the POWER button for 1 second to power off.
26

Using the Remote Control Unit

Installing the Battery in the Remote
1. Remove the battery compartment in the direction of the arrow.
(Back of the remote control)
Hole
Operating Range of Remote Control Unit
Important!
Do not subject the remote control unit to strong vibration or shock.
Keep the remote control unit free from moisture and water.
Caution
• After battery replacement, your remote control unit may not work. If this occurs,
remove the battery and re-insert in about 5 minutes.
• It may be difficult to operate the remote control unit if the remote control sensor on
the DVD player is exposed to direct sunlight or strong artificial light.
Try operating the remote away from such light sources.
• Remove the battery when not planning to use the remote control unit for a long
period of time.
E N G L I S H
2. Place the lithium battery in the battery compartment and put
the battery compartment cover back on the remote.
• Match the polarities (+ and -) on the battery with the marks
in the battery compartment. If the battery is inserted in the
wrong direction, your remote control may not work correclty.
Remote Control Sensor
27