Inserting And Ejecting A Cassette - Samsung VP-D87I Owner's Instruction Book

ENGLISH
Preparation

Inserting and Ejecting a Cassette

When inserting a tape or closing a cassette holder, do not apply excessive force.
This may cause a malfunction.
Do not use any tapes other than Mini DV CASSETTES.
1. Connect a power source and slide the TAPE EJECT
switch and open the cassette door.
- The cassette holding mechanism rises automatically.
2. Insert a tape into the cassette holder with the tape
window facing outward and
the protection tab toward the top.
3. Press the area labelled PUSH on the cassette holding
mechanism until it clicks into place.
- The cassette is loaded automatically.
4. Close the cassette door.
- Close the door completely until you can hear a
ÒclickÓ.
Reference
When you have recorded something that you wish to keep, you can
protect it so that it will not be accidentally erased.
a. Protecting a tape :
Push the safety tab on the cassette so that the hole is uncovered.
b. Removing the tape protection :
If you no longer wish to keep the recording on the cassette,
push the write-protect tab back so that it covers the hole.
¥ How to keep a tape
a. Avoid places with magnets or magnetic interference.
b. Avoid humidity and dust prone places.
c. Keep the tape in an upright position and avoid storing it in direct
sunlight.
d. Avoid dropping or knocking your tapes.
1 2
3 4
a.
b.
DV
1.
-
2.
3. PUSH
-
4.
-
a.
b.
¥
a.
b.
c.
d.
27