ENGLISH
Preparation
Adjusting the Hand Strap
It is very important to ensure that the Hand strap has been correctly adjusted
before you begin your recording.
The hand strap enables you to :
- Hold the camcorder in a stable, comfortable position.
- Press the Zoom and START/STOP button without having to change the
position of your hand.
Hand strap
a. Pull open the Hand Strap cover and release the
Hand Strap.
b. Adjust its length and stick it back onto the Hand
Strap cover.
c. Close the Hand Strap cover again.
Shoulder Strap
The Shoulder Strap enables you to carry your
camcorder around in complete safety.
1. Insert the end of strap into the Shoulder Strap
hook on the camcorder.
Insert the other end of strap into ring inside
hand strap.
2. Thread each end into the buckle, adjust the
length of the strap and then pull it tight in the buckle.
Attaching the ring hood
The ring hood helps you
- Reduce glare when recording under sunlight.
Align the ring hood with the lens and screw it clockwise.
22
-
-
c
a
b
1
2
ZOOM
/
a.
b.
c.
1.
2.
-