Samsung SCD590 Owner's Instruction Manual page 106

Digital video camcorder
Hide thumbs Also See for SCD590:
Table of Contents

Advertisement

ENGLISH
Troubleshooting
If these instructions do not solve your problem, contact your
nearest Samsung authorized service center.
Symptom
Explanation/Solution
You cannot switch the
Check the battery pack or the AC Power Adapter.
camcorder on
Check the POWER switch is set to CAMERA.
START/STOP button
does not operate
You have reached the end of the cassette.
while recording
Check the record protection tab on the cassette.
You have left the camcorder set to STBY for more
The camcorder goes
than 5 minutes without using it.
off automatically.
The battery pack is fully exhausted.
The atmospheric temperature is too low.
The battery pack is
The battery pack has not been charged fully.
quickly exhausted.
The battery pack is completely dead, and cannot be
recharged, Use another battery pack.
When you see a blue
The video heads may be dirty.
screen during
Clean the head with a cleaning tape.
playback
Avertical stripe appears
The contrast between the subject and the background
is too great for the camcorder to operate normally.
on the screen when
recording a dark
Make the background bright to reduce the contrast or
background.
use the BLC function while you are recording brighter.
The Viewfinder lens has not been adjusted.
The image in the
Adjust the viewfinder control lever until the indicators
viewfinder is blurred.
displayed on the viewfinder come into sharp focus.
Auto focus does not
Check the M.FOCUS menu.
work.
Auto focus does not work in the Manual Focus mode.
Play, FF or REW
Check the POWER switch. Set the power switch to
button does not work.
PLAYER.
You have reached the beginning or end of the
cassette.
When you see a
This is normal operation and is not a failure or defect.
broken block image
during the REC
SEARCH.
106
106
Problemas y soluciones
Si las siguientes instrucciones no le permiten solucionar el problema,
póngase en contacto con un centro de servicio autorizado.
Síntoma
Explicación/Solución
No es posible encender
Compruebe la batería o el adaptador
la videocámara.
de corriente CA.
El botón START/STOP
Compruebe que el interruptor esté ajustado en la
no funciona mientras
posición CAMERA.
se graba.
Se ha llegado al final del casete.
Compruebe la pestaña de protección contra la
grabación del casete.
La videocámara se
Ha dejado la videocámara en la posición STBY
apaga automáticamente. y sin usarla durante más de 5 minutos.
La batería está completamente descargada.
La batería se descarga
La temperatura ambiente es demasiado baja.
con mucha rapidez.
La batería no se ha cargado por completo.
La batería está completamente desgastada y no se
puede recargar. Use otra batería.
Se ve una pantalla azul
Los cabezales de vídeo pueden estar sucios.
durante la reproducción.
Límpielos con una cinta de limpieza.
Aparece en la pantalla
El contraste entre el objeto y el fondo es demasiado
una línea vertical
para que la videocámara funcione normalmente.
cuando se graba sobre
Ilumine el fondo para reducir el contraste o
un fondo oscuro.
use la función BLC.
La imagen se ve
No se ha ajustado la lente del visor.
borrosa en el visor.
Desplace botón de ajuste del foco hasta que los
indicadores se vean enfocados.
El sistema autofoco
Compruebe el menú M.FOCUS.
no funciona.
El autofoco no funciona en la modalidad de enfoque
manual.
Los botones PLAY,
Compruebe el interruptor.
FWD o REW no
Ajústelo en la posición PLAYER.
funcionan.
Ha llegado al principio o al final del casete.
Se ve una cuadrícula
Esta circunstancia es normal.
en la imagen durante
REC SEARCH.
ESPAÑOL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scd530Scd530tScd590t

Table of Contents