Operating Basics; Overview; Switching Power On/ Off - Kenwood TK-2180 Instruction Manual

O
VERVIEW
Your dealer can program your transceiver with Trunking and
Conventional zones. The transceiver can handle up to 128
zones with up to 250 channels/ group IDs in each zone and a
total combined maximum of 512 channels/ group IDs. Zones,
channels/ group IDs, and their functions are programmed by
your dealer.
S P
WITCHING OWER
Turn the Power switch/ Volume control clockwise to switch
the transceiver ON.
• A beep sounds and the display momentarily lights up.
• If the Transceiver Password function is programmed, "
appears on the display. You must enter the password to unlock
the transceiver. Refer to "Transceiver Password", below.
Turn the Power switch/ Volume control counterclockwise to
switch the transceiver OFF.
T
RANSCEIVER
To enter the password using the DTMF keypad (keypad
models only):
1 Press the DTMF keys corresponding to the password
digits.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
2 Press the S or
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.

OPERATING BASICS

ON/ OFF
P
ASSWORD
key to confirm the password.
"
17