All Erase - Kenwood XD-981MD Instruction Manual

66
Erasing a single track
TRACK ERASE
During playback, it is possible to erase only the track be-
ing played. The track numbers of the tracks after the erased
track will be adjusted.
Be careful in using this operation because a track cannot
be recovered once it has been erased.
1
Make the preparations.
To erase one track (TRACK ERASE)
1 Start playback.
2 Select the track to be erased.
2
Select the ERASE mode.
Select "ERASE".
Each press switches the operation.
EDIT
TITLE SEARCH
0 0 2 + E R A S E ?
3
Execute the erase operation.
C O M P L E T E
÷ The track is erased (together with the track title).
(TRACK ERASE)
MD
3
P.CALL
4 ¢
Return Advance
TRACK EDIT
1 DIVIDE ?
2 COMBINE ?
3 ERASE ?
4 Editing cancelled
STEREO
DIGITAL
0 0 2
C 8 0
E !
or erasing all tracks on a disc

ALL ERASE

During stop, all tracks can be erased. Be careful in using
this operation because the tracks cannot be recovered once
the entire minidisc has been erased.
To erase all tracks (ALL ERASE)
TUNED
TOTAL
1 2
:
.
÷ Editing is aborted if no operation has been performed for 8
seconds.
0 0 5
÷ All tracks on a disc are erased (together with the disc title).
MD Edit Functions
(ALL ERASE)
7
Enter stop status.
1 Select "ALL ERASE".
TRACK EDIT
Each press switches the operation.
1 MOVE ?
2 COMBINE ?
3 ALL ERASE ?
4 Editing cancelled
2 Set it.
EDIT
TITLE SEARCH
A L L + E R A S E ?
C O M P L E T E E
B L A N K R D I S C
XD-981MD (En)
0 0 2
!