Producing A Tape Collecting Only The First Titles (Cd =Tape); (Best Hits Function) - Kenwood XD-981MD Instruction Manual

Producing a tape collecting only the first titles (CD =TAPE)

(BEST HITS Function)

The first tracks of all set CDs will be recorded on tape in sequence.
During recording of the disc, the already recorded discs can be exchanged. This is convenient for collecting from a large
number of single CDs.
1
Make the preparations for recording.
1 Load a tape.
2 Select the tape transport direction. (2 or 3)
3 Select "p". (two-side recording)
4 Select the Dolby NR mode.
5 Select CD with the INPUT SELECT key.
6 Insert disc(s) in the CD player.
7 Confirm that the "PGM" indicator is not lit.
2
Press the BEST HITS key.
3
Start recording.
4
Exchange discs as required.
1 Exchange the disc.
2 Close the tray.
When the discs are exchanged sequentially, recording
can be continued without interruptions.
BEST HITS
Press in stop mode.
O.T.E.
OPEN/CLOSE
With recording onto tape, the track will be inter-
rupted for the part of the guide tape at the tape re-
versal, where recording is not possible. Please use
single-side recording if this is to be avoided.
Goes off
N. B.
PGM
CD
C D C D D I S C
EDIT
TITLE SEARCH
1 = 2 = 3
H I T S D
÷ The first title of each CD will be programmed automatically.
÷ When the TWIN REC key is pressed, simultaneous recording
to MD and tape is possible.
÷ When the 3/8 key is pressed before pressing the O.T.E. key,
the BEST HITS program can be played back.
÷ Even while recording from the next disc, the already recorded
disc can be exchanged.
÷ When a CD is exchanged, the first title of that disc will be
programmed automatically.
÷ Recording ends when the tape end (one side or both sides) is
reached.
To stop recording
÷ Recording and playback are also stopped when the 7 key of
the CD player is pressed.
÷ Press the PGM key or the BEST HITS key to cancel the BEST
HITS function.
Convenient Recording Methods
XD-981MD (En)
STEREO TUNED
DIGITAL TOTAL
d 0 1 C 8 0 0 0
:
.
7
55