One-Touch Recording Of One Cd; (One-Touch Edit Recording Of All Tracks) - Kenwood XD-981MD Instruction Manual

52

One-touch recording of one CD

All tracks of one CD can be recorded by one-touch operation.
Recording from CD is possible to tape or MD and simultaneously to MD and tape.
1
Make the preparations for recording.
CD =MD
1 Insert a recordable disc into the MD
recorder.
2 Select CD with the INPUT SELECT
key.
3 Insert disc(s) in the CD player.
2
Start recording.
CD =MD
1Select the target disc.
2 Start recording.
Press before playback
of the CD starts.
When the O.T.E. key is pressed after playback has
started, only the track being played at that time will be
Note Note
recorded.
To interrupt a recording
CD =MD
Simultaneous recording from CD
to MD and tape
1 Load a tape.
2 Select the tape transport direction.
(2 or 3)
3 Select "p". (two-side recording)
4 Select the Dolby NR mode.
5 Select CD with the INPUT SELECT
key.
6 Insert disc in the MD recorder.
7 Insert disc(s) in the CD player.
CD =MD, TAPE
1Select the target disc.
2 Start recording.
O.T.E.
CD =MD, TAPE
7

(one-touch edit recording of all tracks)

CD =TAPE
1 Load a tape.
2 Select the tape transport direction.
3 Select "p". (two-side recording)
4 Select the Dolby NR mode.
5 Select CD with the INPUT SELECT
6 Insert disc(s) in the CD player.
CD player and MD recorder must be brought to stopped condition.
CD =TAPE
1 Select the target disc.
2 Start recording.
TWIN
REC
Press before playback
of the CD starts.
÷ With recording onto tape, the track will be interrupted for the
part of the guide tape at the tape reversal, where recording is
not possible. Please use a different recording method if this is
to be avoided.
CD =TAPE
7
÷ Recording and playback will be stopped.
Convenient Recording Methods
XD-981MD (En)
(2 or 3)
key.
O.T.E.
Press before playback
of the CD starts.
7