Kenwood XD-981MD Instruction Manual page 17

Muting the sound temporarily
MUTE
÷ Press again to resume the original volume.
÷ This is also cancelled when the volume is changed.
Bass compensation
(N.B.CIRCUIT : Natural Bass circuit)
(Remote control unit only)
Lights
N.B.
Each press switches the modes as follows.
1 N B 1 ............... The bass range is compensated ac-
cording to the volume (effective at
low volume).
2 N B 2 ............... Bass range compensation indepen-
dent of the volume.
3 N B OFF .......... N.B. cancellation.
C D M P D I S C
When CD has been selected.
EX.BASS
CD
V O L U M E
Volume display
(Remote control unit only)
Blinks
VOL
DIGITAL
1 2 3
:
N. B.
CD
N B 1 A
+Scroll indication
E 1
1 2 3
5 6 7
9 10 11
13 14 15
MD
VOL
DIGITAL
2 0
Listening through headphones
Insert the headphone plug into the PHONES jack.
÷ The sounds from all speakers are cut off.
Bass and treble compensation
The factory default is ON.
Bass and treble range are compensated.
EX.BASS
÷ Switching between ON and OFF each time the key is pressed.
AUTO POWER SAVE function
When the unit is ON and the unit is left for 30 minutes with CD,
MD, and TAPE not operating, the unit is switched off automati-
cally by this function. This is convenient when you forgot to
switch off the unit. This function can be activated or deactivated
by the following operation.
EX.BASS
Press the key while the unit is OFF.
1 "ON" .... Auto power save is used.
2 "OFF" ... Auto power save is not used.
÷ When the input selection is TUNER, AUX, or DIGITAL IN, this
operates only when the volume is zero or when MUTE is on.
4
8
12
16
STANDBY mode of ON/STANDBY (
When the display section (time display) of this unit is lit or flash-
ing, a small amount of power is supplied to the system. This is
called the standby mode. In this condition, the unit can be
switched on from the remote control.
Let's put out some sound
PHONES
(EX. BASS)
EX.BASS
E X B A S S
E R S A V E
+Scroll indication
(AUTO POWER SAVE ON)
17
XD-981MD (En)
M
CD
O N
O N
) key