Turning The Display Saver On/Off - Kenwood R-K1000 Instruction Manual

ClearA
SLEEP TIMER DISPLAY DIMMER
MODE
ROOM EQ SOUND
FLAT TONE
MODE PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER D.AUDIO CD
BAND MUTE
TAPE
AUX PHONO
D-IN1 D-IN2 D-IN3
RANDOM REPEAT P.MODE CLEAR
RC-R0830E

Turning the Display Saver ON/OFF

If the system is not used at all for a set period, this function scrolls
the display to prevent burn-in of the text on the display and uneven
display brightness.
1 1
Press the [MODE] key.
2 2
Select "DISP. SAVER".
Press the [A] or [B] key.
Press the [ENTER] key.
3 3
Select "ON" or "OFF".
Press the [A] or [B] key.
Press the [ENTER] key.
When you are playing a CD (when the DP-K1000 (sold separately) is
connected), the display saver is activated if the system is not used at all
for 10 minutes after the CD stops playing. If you selected another input
source, the display saver is activated if the system is not used at all for 10
minutes after the last key is pressed.
If the R-K1000 is connected to the DP-K1000 using the system control
connection, the Display Saver runs on the DP-K1000 also.
Display Settings
The display saver is active.
The display saver is disabled.
59
English