Setting The Program Timer (Program) - Kenwood R-K1000 Instruction Manual

Setting the Timer
ClearA
SLEEP TIMER DISPLAY DIMMER
MODE
ROOM EQ SOUND
FLAT TONE
MODE PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER D.AUDIO CD
BAND MUTE
AUX TAPE
PHONO
D-IN1 D-IN2 D-IN3
RANDOM REPEAT P.MODE CLEAR
RC-R0830E
54
R-K1000

Setting the Program Timer (PROGRAM)

This function allows you to use the timer to automatically start playback at
a specifi ed time. You can set two timers (PROG. 1 and PROG. 2) at the same
time. You can use the timer to activate CD, radio or external component.
Set the system's clock to the correct time beforehand. (P.52)
Separate the times for PROG. 1 and PROG. 2 by at least 1 minute to ensure that their
operating times do not overlap.
1 1
Press the [MODE] key.
2 2
Select "TIMER SET".
Press the [A] or [B] key.
Press the [ENTER] key.
3 3
Select "PROG. 1" or "PROG. 2".
Press the [A] or [B] key.
Press the [ENTER] key.
4 4
Select "ON" or "OFF".
Press the [A] or [B] key.
Press the [ENTER] key.
Selecting "OFF" ends the procedure and
restores the original display.