Matching The Acoustic Eff Ect To The Conditions - Kenwood R-K1000 Instruction Manual

Sound Presets R P.45
Related Related
Information Information
ClearA
SLEEP TIMER DISPLAY DIMMER
MODE
ROOM EQ SOUND
FLAT TONE
MODE PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER D.AUDIO CD
BAND MUTE
AUX PHONO TAPE
D-IN1 D-IN2 D-IN3
RANDOM REPEAT P.MODE CLEAR
RC-R0830E

Matching the Acoustic Eff ect to the Conditions

Carry out the "ROOM EQ" (P.38) procedure beforehand. This
procedure then allows you to select the sound mode based on
the selected sound eff ect and your listening conditions.
1 1
Press the [ROOM EQ MODE] key.
2 2
Press the [A] or [B] key to select the sound mode.
The display changes as shown below.
3 3
Press the [ENTER] key.
"ROOM EQ" does not appear and "ROOM EQ MODE" will not work prior to
automatic setup or when "R.EQ OFF" is selected.
ROOM EQ (Room Equalizer) ROOM EQ (Room Equalizer)
This mode faithfully reproduces the results of
the ROOM EQ measurements.
This mode allows you to enjoy music with no
discernible loss of quality over a relatively wide
area centered around the measurement position.
This mode enhances the reproduction of
highly melodic music when you are listening
at low volumes, as with late-night listening.
This mode creates an environment with complex
reverberations, similar to a concert hall.
This mode provides enhanced reproduction
of vocals and speech.
41
English