Setting The Time - Kenwood R-K1000 Instruction Manual

Setting the Time

Set the system clock to the correct time. If you use the Program Timer for playback when the time is not
set correctly, you will not be able to run the program at the correct time.
ClearA
SLEEP TIMER DISPLAY DIMMER
MODE
ROOM EQ SOUND
FLAT TONE
MODE PRESET
ENTER
TUNING
VOL
P.CALL
AUTO / MONO
TUNER D.AUDIO CD
BAND MUTE
AUX TAPE
PHONO
D-IN1 D-IN2 D-IN3
RANDOM REPEAT P.MODE CLEAR
RC-R0830E
52
R-K1000
1 1
Press the [MODE] key.
2 2
Select "TIME ADJUST".
Press the [A] or [B] key.
3 3
Set the day of the week.
Press the [A] or [B] key.
4 4
Set the time.
Press the [A] or [B] key.
Set the "hour".
Press the [A] or [B] key.
Set the "minute".
The set day and time are displayed.
If you make a mistake with the settings, press the [C] or [D] key to move the
cursor and re-enter the settings.
If there is a power failure or the system is unplugged from the wall outlet for
some time, set the time again.
Pressing the [F] key while the system is in the Standby mode will display the
time for 5 seconds.
Press the [ENTER] key.
Press the [ENTER] key.
The "hour" fl ashes.
Press the [ENTER] key.
The "minute" fl ashes.
Press the [ENTER] key.