Kenwood KTC-9090DAB Instruction Manual page 28

Installation
Mounting the DAB Hideaway Unit
2CAUTION
• Install the DAB hideaway unit in a well-ventilated location
and do not place objects on top of it.
• When installing to the car, the unit should be securely
fastened at a location that will not interfere with driving.
• When making a hole in the chassis, check that the gas tank,
break pipe, wire harness, or other part is not located on the
other side, and be careful not to cause scratches.
• When attaching the mounting fittings (Accessory2) to
the DAB hideaway unit, use only the supplied mounting
screws (Accessory3) (M4 × 8 mm). Use of screws other than
those supplied may result in internal damage or insecure
mounting and is very dangerous.
• Installation using the self-tapping screws
DAB antenna cable
Accessory5
• Installation using the velcro tapes
28
|
English
Accessory4 (Ø5 × 20 mm)
Accessory2
Pile carpet
Accessory3 (M4
× 8 mm)
Carpet
Board etc.
thickness: 20 mm or more
Accessory6