Dab Reception; Primary/Secondary Switching; Service Preset Memory - Kenwood KTC-9090DAB Instruction Manual

DAB features (Basic)

DAB Reception

In DAB, select Ensemble and then choose Service
(Audio programme).
Switching the ensemble
Ensemble
Service 1
Service 2
Service 3
1
Switching the ensemble
Press the [4] or [¢] button for at least 1
second.
As for F group, touch [4] / [¢] on the DAB
Control Screen.
Tuning mode
Auto Ensemble Seek
Preset Service Recall
Manual Seek
2
Switching service
Press the [4] or [¢] button.
As for F group, touch [S+] / [S-] on the DAB
Control Screen.
NOTE
• Switching the Service causes a break-off of the sound for
about one second.
• There is no switching to data service.
• The ST indicator lights during reception of a Stereo Audio
programme.
• As for E and F group, Services can be switched directly
whilst the Service list is being displayed (page 8 - 9).
12
|
English
ABCDEFG
channel
(band III) (L band)
Switching service
Operation
An Ensemble in good receiving condition
can be selected and received.
Services registered can be recalled in the
order of the Pre-set number.
Channels are switched one after another.

Primary/Secondary Switching

The Primary and Secondary can be switched with
services that are composed of more than one service
components.
Ensemble
Service 1
Primary
Secondary
Service 2
Press the [AM] button.
As for E and F groups, touch [P/S] on the DAB
Control Screen.
NOTE
• When Secondary service exists in Service.
ABCG: The P/S indicator is ON.
E: The PR indicator is ON.
F: The P/S indicator is ON blue.
When Secondary service is selected.
ABCG: The P/S indicator blinks.
E: The SC indicator is ON.
F: The P/S indicator is ON red.
• The Primary is selected automatically when the service is
switched or the unit is turned off.
• The Primary/ Secondary switching is not available when
the service has only one service component or its
Secondaries consist of data services.
• As for B and F group, set the desired language in the
<Language Filter Select Mode> to switch to only the set
language. If the selected language has no Secondary,
switching to the Secondary is not possible (page 17).

Service Preset Memory

The service being received can be stored in memory
under a preset button.
ABCDEF
1
Press the [FM] button to select the preset band.
As for E and F groups, touch [BAND] / [DB] on
the DAB Control Screen.
Each time you press the button, the preset band
switches between DAB1, DAB2 and DAB3.
2
Receive the service to be preset.
3
Hold down the preset button ([1] - [6]) to preset
the service for two seconds or more.
The service is preset when the number of the
button blinks once.
ABCDEFG
"PRIMARY" / "P/S P"/ "PRI"/ "MAIN"
"SECONDARY"/ "P/S S"/ "SEC"/ "SUB"
ABCDEFG