Direct Access Tuning; Station Preset Memory; Auto Memory Entry; Preset Tuning - Kenwood KDC-X9006U Instruction Manual

Tuner/TV control features
Function of remote control

Direct Access Tuning

Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.

Station Preset Memory

Putting a station in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Select the frequency to put in the memory
Push the Control knob towards [4] or [¢].
3
Enter Preset Memory mode
Using the Control knob, select "P.MEMORY".
For the operation method, refer to <Function
Control mode> (page 9).
4
Select the number to put in the memory
Turn the Control knob.
5
Determine the number to put in the memory
Press the Control knob.
6
Allow the determined number to take effect
Press the Control knob.
Cancelling the Preset Memory mode
Press the [FNC] button.
|
20
English
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]

Auto Memory Entry

Putting stations with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in the
memory Auto Memory Entry closes.

Preset Tuning

Recalling the stations in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Enter Preset Tuning Select mode
Turn the Control knob.
3
Select a desired station in the memory
Turn the Control knob.
4
Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [FNC] button.

Frequency Step Setting

Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM
band 9 kHz.
1
Turn the power OFF
Press the [SRC] button for at least 1 second.
2
Switch the frequency step
While pressing the [FNC] and [ATT] buttons,
press the [SRC] button.
Release your fingers from the button after the
display appears.
The frequency step changes to FM band 200 kHz,
and AM band 10 kHz.
⁄
• When the same operation is repeated, the frequency
step returns to the original setting.
• When the frequency step is changed, the frequencies in
the memory are deleted.