Touch Sensor Tone; Manual Clock Adjustment - Kenwood KDC-MP436U Instruction Manual

Hide thumbs Also See for KDC-MP436U:

Firmware update manual (1 page)

Table Of Contents

Table of Contents

⁄

• When you activate the Security Code function, it cannot be

released.

Note, your Security Code is the 4 digit number entered in

your "Car Audio Passport" in this package.

Enter Standby

Press the [SRC] button.

Select the "STANDBY" display.

Enter Menu mode

Press the [MENU] button.

When "MENU" is displayed, "CODE SET" is also

displayed.

Enter Security Code mode

Press the Control knob for at least 1 second.

When "ENTER" is displayed, "CODE" is also

displayed.

Select the digits to enter

Push the Control knob towards right or left.

Select the Security Code numbers

Push the Control knob towards up or down.

Repeat step 4 and 5, and complete the Security

Code.

Confirm the Security Code

Press the Control knob for at least 3 seconds.

When "RE-ENTER" is displayed, "CODE" is also

displayed.

Do the step 4 through 7 step operation, and

reenter the security code.

"APPROVED" is displayed.

The Security Code function activates.

⁄

• If you enter a Code different from your Security Code,

you have to start over from step 4.

Exit Security Code mode

Press the [MENU] button.

Resetting the Security Code function when the

audio unit is first used after removed from the

battery power source or the Reset button is

pressed

Turn the power ON.

Do the step 4 through 7 step operation, and

reenter the security code.

"APPROVED" is displayed.

Now, you can use the unit.

⁄

• If an incorrect code is entered, "WAITING" is displayed,

and the input prohibition periods shown in the table

below is generated.

After the input prohibition time lapses, "CODE" is

displayed, and you can reenter the code.

Number of times the

incorrect code was input

In Standby mode