Function Setting System; Security Indicator - Kenwood DPX-8030MD Instruction Manual

Function Setting System

Security Indicator

#1 - #4
Function setting display
FNC 4 ¢
SRC
AM
FM
Function Setting System
Setting during operation beep sound etc. functions.
The Function Setting System basic operation method is
explained here. The reference for the Function items and their
setting content is after this operation explanation.
1
Select the source to set
Press the [SRC] button.
Select the source containing the function item you want to set.
2
Enter Function Setting mode
Press the [FNC] button for at least 1 second.
"FUNCTION SET" is displayed.
3
Select the Function item
Press the [FM] or [AM] button.
Example: When you want to set the beep sound select the
"BEEP" display.
4
Set the Function item
Press the [4] or [¢] button.
Example: When "BEEP" is selected, each time the button is
pressed it switches "BEEP On" or "BEEP Off". Select 1
of them as the setting.
You can continue by returning to step 3 and setting other items.
5
Exit Function Setting mode
Press the [FNC] button.
When other items that are applicable to the basic operation method
above are displayed afterwards their setting content chart is
entered. (Normally the uppermost setting in the chart is the original
setting.)
Also, the explanation for items that aren't applicable are entered
step by step.
— 29 —