Getting Started; Initial Settings; Setting The Security Function - Kenwood DDX795 Instruction Manual

Getting Started

Getting Started

Initial settings

When you power on the unit for the first time, the
<Initial SETUP> screen appears.
Perform the initial settings.
E.g. Initial settings screen for DDX795
Once completed, a warning message appears. Touch
[Agree] to display the Home screen.
[Language]*1
Select the text language used for on-screen
information.
Touch [Language Select], then select the language.
• American English (en) (Initial)/British English (en)/
Nederlands (nl)/Français (fr)/Deutsch (de)/
Italiano (it)/Español (es)/(ar)
Português (pt)/Čeština (cs)/Polski (pl)/
Magyar (hu)/Руccĸий (ru)/
Türkçe (tr)/ (zh)/(he) /(fa)
Bahasa Melayu (ms)/Bahasa Indonesia (id)
[Clock] (Page 8)
Set the calendar and clock time.
Make the settings for [Clock], [Time Zone] or [Clock
Adjust].
[Display] (Page 51)
Make the settings to adjust the display.
[Camera] (Page 53)
Make the settings to display the picture from the
connected view camera.
[OEM SETUP]*2 (Page 50)
Confirm the information about/change the settings for
using the ADS adapter.
[DEMO]
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
*1 Only for DDX795/DDX775BH/DDX6018BT/DDX5018BT/DDX595/
DDX575BT/DDX718WBTL: "Please Power Off" appears when the
setting is changed. To enable the change:
– When <Manual Power OFF> is set to [AV OFF], turn off the
ignition switch, then turn on the ignition switch.
– When <Manual Power Off> is set to [Complete OFF], turn off
the power of the unit, then turn on the power of the unit.
*2 Only for DDX795/DDX775BH/DDX595/DDX575BT.

Setting the security function

Registering a security code
(Only for DDX6018BT/DMX6018BT/DDX5018BT/
DDX718WBTL/DMX718WBTL)
You can set a security code (four-digit number of
/Ελληνικά (el)/
your choice) to protect your receiver system against
theft. Once you set the security code, you are required
(th)/
to input the security code when the power is on to
/
reconnect the battery.
1
Display the Home screen.
DDX6018BT
DMX6018BT
DDX5018BT DDX718WBTL
DMX718WBTL
2
Display the <Security Code Set> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch as follows:
[Security] → [Security Code Set]
3
Enter a four-digit number (
confirm the entry ( 2 ).
• To clear the last entry, touch [BS].
• To cancel the setting, touch [
4
Enter the four-digit number entered in
step 3 and touch [Enter] again to confirm
your security code.
To change the security code: Touch [Security Code
Change] on the <Security> screen on step 2, then
repeat steps 3 and 4.
To clear the security code: Touch [Security Code
Cancellation] on the <Security> screen on step 2,
then repeat step 3.
1 ), then
].
ENGLISH 7