Clifford Matrix 2.2X Owner's Manual page 23

note: Arming and disarming the system does not reset this
function.The only ways to reset a bypassed zone are for it
to not trigger for 60 minutes, or to turn on the ignition. If
testing your system, it is important to remember that the
NPC® programming can cause zones to be bypassed and
appear to stop working. If five chirps are heard when dis-
arming, NPC® has been engaged. If you wish to clear the
NPC® memory, turn the ignition key on.
NPC is programmable. See Programming Options section of
®
this guide.
a a u u x x i i l l i i a a r r y y o o u u t t p p u u t t s s ( ( o o p p t t i i o o n n s s ) )
This system also supplies outputs that can control convenience
options such as remote control trunk release and window automa-
tion. Consult your dealer for available options for your system.
Channel 2 Trunk release: When connected, pressing
seconds will remotely release the vehicle trunk lid.
Channel 4 auxiliary output: When connected, pressing
will immediately activate this output to control an
additional convenience option.
Channel 5 auxiliary output: When connected, pressing
will immediately activate this output to control an
additional convenience option.
The remote will respond with a page notification consisting of
an output tone (once) and the Yellow LED will flash 3-times.
20
for 1.5
and
and
© 2004 directed electronics, inc.