Honeywell T8611 Owner's Manual page 7

The oroaram times are the same
for bbthheating and cooling.
Only the cooling temperatures
need to be programmed if you
have already programmed for
heating. To set ti~mes as you pro-
gram the cooling temperatures,
use the TIME AHEAD and BACK
keys as described in Step 2. But
if you change times for cooling,
you are also changing them for
heating!
First program the WAKE temper-
ature for weekdays.
Press and release. The display
shows WAKE and the time and
temperature you programmed for
heating.
Press and release so COOL
shows on the display, along with
the preprogrammed cooling
temperature.
If display reads SAT or SUN,
press and hold until MON TUE
WED THU FRI appears.
Press and hold until the display
shows the desired temperature.
If the display blinks while you
hold down TEMPERATURE
WARMER or COOLER, you have
reached the setting limit. If your
thermostat can switch
automatically between heating
and cooling, the cooling
temperature must be at least 3
degrees higher than the
corresponding heating
temperature. For example, if the
heating setting is 70' F, the
minimum cooling setting is 73" F.
If you desire a lower cooling
temperature, the heating
temperature must first be
lowered accordingly.
1_533-1
10