Voip-To-Pstn Gateway Setup Section (Spa8800); Pstn-To-Voip Gateway Setup Section (Spa8800) - Cisco Small Business SPA2102 Administration Manual

ATA Voice Field Reference
Line page
Cisco Small Business ATA Administration Guide
Voice tab > Line page or Phone page>

VoIP-to-PSTN Gateway Setup section (SPA8800)

Line 1 VoIP Caller
DP
VoIP Caller Default
DP
Line 1 Fallback DP
Voice tab > Line page >

PSTN-To-VoIP Gateway Setup section (SPA8800)

PSTN CID for VoIP
CID
PSTN CID Number
Prefix
PSTN caller Default
DP
Index of the dial plan in the dial plan pool to be used when
the VoIP Caller is calling from Line 1 of the same SPA8800
unit during normal operation (in other words, not due to
fallback to PSTN service when Line 1 VoIP service is
down). Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}
Authentication is skipped for Line 1 VoIP caller.
The default is 1.
Index of the dial plan in the dial plan pool to be used as the
default. Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}.
The default is 1.
Index of the dial plan in the dial plan pool to be used when
the VoIP Caller is calling from Line 1 of the same SPA8800
unit due to fallback to PSTN service when Line 1 VoIP
service is down. Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}.
The default is 1.
Choose yes or no.
The default is no.
The prefix to add to the caller ID number on the PBX to
ensure that a callback goes to the correct number.
Enter the digits.
Index of the dial plan in the dial plan pool to be used when
the PSTN Caller is not authenticated. Choose from {1, 2, 3, 4,
5, 6, 7, 8}.
The default is 1.
B
183