Linksys SPA2102-AU Provisioning Manual page 66

Configuration Profile Parameters
Table 4-1
Parameter Name
Profile_Rule_B
Profile_Rule_C
Profile_Rule_D
Log_Resync_Request_Msg
Log_Resync_Success_Msg
Log_Resync_Failure_Msg
Report_Rule
Linksys SPA Provisioning Guide
4-4
Configuration Profile Parameters (continued)
Chapter 4
Description and Default Value
Defines second, third, and fourth resync
commands and associated profile URLs. These
profile scripts are executed sequentially after the
primary Profile Rule resync operation has
completed. If a resync is triggered and Profile
Rule is blank, Profile Rule B, C, and D are still
evaluated and executed.
The default is (empty).
This parameter contains the message that is sent
to the Syslog server at the start of a resync
attempt.
The default is $PN $MAC – Requesting resync
$SCHEME://$SERVIP:$PORT$PATH.
Syslog message issued upon successful
completion of a resync attempt.
The default is $PN $MAC – Successful resync
$SCHEME://$SERVIP:$PORT$PATH -- $ERR.
Syslog message issued after a failed resync
attempt.
The default is $PN $MAC – Resync failed:
$ERR.
The target URL to which configuration reports
are sent. This parameter has the same syntax as
the Profile_Rule parameter, and resolves to a
TCP/IP command with an associated URL.
A configuration report is generated in response to
an authenticated SIP NOTIFY message, with
Event: report. The report is an XML file
containing the name and value of all the device
parameters.
This parameter may optionally contain an
encryption key.
For example:
[ --key $K ]
tftp://ps.callhome.net/$MA/rep.xml.enc
The default is (empty).
Provisioning Field Reference
Version 3.0